How do I replace the room temperature sensor on my Aduro Hybrid?

Difficulty level: Easy
Time consumption: 15 minutes
Tools: TORX 15 screwdriver, 2 mm flathead screwdriver
Components: Temperature sensor

NB: All changes and adjustments must be conducted when the stove is cold and disconnected from the power supply.

How to replace the room temperature sensor

The room temperature sensor is placed at the bottom back of the hybrid stove. To access it properly, the backplate must be removed. This can be done by unscrewing the 4 screws that hold the plate.

To remove the sensor from the plastic holder, you must press/pull on the metal casing (image 1+2).

The old sensor must be replaced by the new one on the control board. The control board is located at the bottom right inside of the stove (image 3). Pull the connector, not the cable (image 4). Replace the old cables with the cables of the new sensor, and reinsert the connecter into the control board:

The metal end of the sensor can now be inserted into the plastic holder:

The room temperature sensor has now been replaced. Reinstall the backplate with the four screws to complete the installation.