How do I use the control panel on my hybrid stove?

The stove has a control panel which you can use to operate the stove manually. Depending on when your stove was produced, the control panel will differ:

Small control panel

The buttons and LED lights have the following functions:

• ON/OFF button: Press the button to turn the stove on and off. Hold the button to reset an alarm.
• Auger button: Press the button to change heat level while the stove is in operation. Hold the button to manually feed pellets when the stove is not in operation.
• LED light ON: The stove is in operation.
• LED light OFF: The stove is in standby.
• LED light STOP: The door is open, or the stove has an alarm (the alarm will be displayed in the hybrid app).

Large control panel

The buttons and LED lights have the following functions:

• Wi-Fi symbol lights blue: Wi-Fi is connected to router.
• III lights green: Stove is working on heat level 3. 
• II lights green: Stove is working on heat level 2.
• I lights green: Stove is working on heat level 1. 
• OFF lights yellow: Stove is turned off (standby). 
• ALARM lights red: The stove has an alarm (the alarm will be displayed in the hybrid app), or the door is open.
• ON/OFF button: Press the button to turn the stove on and off. Hold the button to reset an alarm (the alarm will be displayed in the hybrid app).
• Auger button: Press the button to change heat level. Hold the button to manually feed pellets when the stove is not in operation. 
• Service button: With this button, you can reset the wi-fi settings. Slowly press the button 3 times (1 second between touch). All LED lights will turn on. When the LED lights turn off, wi-fi settings has been reset. 

The settings set on the control panel will also be aligned in the Aduro Hybrid app.