How to change control panel Aduro P2

Difficulty level: Intermediate
Time consumption: 10 minutes Flexible bits screwdriver, Top Socket Bits
Components: Control panel for Aduro P2 (Ext. No. 951059400)

NB: All changes and adjustments must be conducted when the stove is cold and disconnected from the power supply.
NB: This guide is recommended for professional craftsmen.

Accessing the control panel

1. Carefully remove the lower back plate of the stove, ensuring that no cables are accidentally pulled or damaged in the process.

2. The control panel is accessible from the inside of the stove, next to the pellet silo. Follow the wide cable running from the control board to the control panel (see picture 1+2)

3. Gently press on the left side of the control panel until it pops out the front. It is glued to the side plate, so if needed, carefully loosen it from the front to assist with removal (see picture 3+4).

4. Replace the control panel with the new one by connecting the cable to the new panel (see picture 5).

5. Insert the new control panel into the slot where the old one was positioned (see picture 6).

6. Reattach the lower back plate to complete the process.