How do I adjust the door and closing mechanism on Aduro 20?

1. Detach the four screws that hold the top plate of the stove in place. There are two screws in the back of the stove (see image 1) and one on each side of the stove (see image 2 and 3).
2. Lift up and take off the top plate.
3. Open the door and remove the pin on the hinge (see image 4) with pliers.
4. Take the door off the hinges.

5. You now have two options:

a) The position of the door is too low and needs to be raised: To raise the door, put an extra washer on the hinge (see image 5). If it is not enough with the extra washer, try loosen the two screws on the top of the stove (see image 6).

b) The door is hanging: If the door is hanging, loosen the two screws at the bottom of the stove (see image 7) and press the hinge 1 mm to the right.

6. Attach the door again. Test if the door closes correctly before mounting the top plate again.
7. Finally, mount the top plate and attach it with the four screws (two in the back of the stove and one on each side of the stove).