How do I replace the glass gasket on the Aduro P2?

Difficulty level: Easy
Time consumption: 15 minutes
Tools: 8 mm wrench
Components: 8x3x2000 mm (w*h*l) braided glass fiber gasket

1. Dismount the two 8 mm nuts on the inside of the door (image 1).

2. Lift off the top bracket (image 2).

3. Remove the old gasket from the door (image 3).

4. Use an Aduro Easy Clean sponge or an abrasive sponge to remove old glue residues. If the paint is damaged during cleaning, we recommend repainting the surface with Aduro Spray, black metallic.

5. Place the new gasket in the same position as the old one (image 5).

6. Insert the glass into the lower glass holder at the bottom of the door (image 6).

7. Place the bracket back into position and secure it with the nuts (image 7).

The installation is now complete.